DX-Projekt 11m Band - Part III
I was just at the hardware store to schonmal to search for the components. Absolute disaster.
are our first two DIY stores to small to have decent stuff, and secondly I find a suitable material. For example
. the Boom:
I thought of an X-connector - does not exist!
Then pinch a T-connector - there's, but since water will flow in such pipes, will it take place only in the 87 ° angle!
And the thing with the segmentation of the boom (5.40 m or 6 m, no matter):
I thought of 5 segments, with the mean includes an X-connector and the side is 1m long and there I wanted to turn each page 2x2m tubes stuck with 40mm diameter.
Now it would be better if we could at least adjust the reflector set to clean the SWR value to. By hindering the telescoping but at some point by the boom and spreader set the respective boom segment!
so it would be useful but the spreader BY AN instead to mount the boom.
's needs but given a special cross-connection which is also still can be secured by mast clamp on the boom. Very complicated and expensive.
Right now, I know no further.
Possibly. There's major construction markets in appropriate tubes.
to build the boom in aluminum costs also neat. 25mm-diameter aluminum pipe 2m cost around 20 € In addition, the problem of connecting the segments ...
Very tricky. Become a first
eat something.
If for the moment. Hello
0 comments:
Post a Comment