DX-Projekt 11m Band - Part V
So, the project is progressing steadily.
I've just ordered the electric parts, at Reichelt. I was able to reduce the cost even more and am now just under 20 € (excluding shipping).
Possibly. I will expand after the test operation of the wood version of the plastic version. I also have
possibly another version of the Boom-/Spreaderverbindung: over four-round tube known lath. This will stabilize and further enables the alignment of the elements ...
begins Otherwise, as already mentioned, tomorrow is the building boom of the battens and spreader arms of hazelnut bush poles.
The final challenge, the mast assembly. We have 5m long spruce logs, which I will probably use for the test mode.
To Quad Hief to the mast, I was thinking of a cable winch construction. It is attached to the mast a role on a rope is pulled up by the quad is. Once at the top, the rope anchored above the quad attached to the mast by a head 40/40er mizzenmast terminal.
as the location I have chosen our pasture behind the house, at the highest point at approximately 270m above sea level. NN sources.
tomorrow is first "beautiful hike through the woods" - to search for suitable branches ...
everything else soon.
0 comments:
Post a Comment